|
| |
Matches' Affiliations
Solvent Engineering
Solvent Engineering provides formulation and sourcing of industrial and
institutional chemicals (liquids, pastes and powders) to small manufactures and
end-users on a license, work-for-hire or direct purchase basis..
 | Solvent Engineering formulates industrial and
institutional chemical products to your product efficiency, environmental
and cost specifications. Formulations
include environmentally friendly attributes such as biodegradability, low
VOC, low toxicity and user safety. Solvent
Engineering identifies local sources for purchase of raw materials.
Manufacturers use industrial products on the production floor or assembly
line either directly in manufacture (cutting or grinding fluids) or in
facility maintenance (cleaners for machinery and floors).
Schools, offices, hotels or restaurants clean, maintain and service
their facilities with institutional products.
These products include cleaners, solvents, degreasers, detergents,
shampoos, wax strippers, polymer and rubber strippers, oven cleaners, rinse
additives, rug and carpet shampoos, window and glass cleaners, hand
protective cleaners, skin shields, air fresheners, graffiti removers, floor
polishes, cleaners and strippers, hand soaps, miscellaneous hard surface
cleaners, drain openers and maintainers. |
| Solvent Engineering formulates industrial and
institutional chemical products to your product efficiency, environmental
and cost specifications. Formulations
include environmentally friendly attributes such as biodegradability, low
VOC, low toxicity and user safety. Solvent
Engineering identifies local sources for purchase of raw materials. |
| Solvent Engineering reformulates products
to produce the same solubility characteristics while reducing or eliminating
unwanted components. Proprietary software calculates the Hansen Solubility
Parameters and matches them with alternative components from a database of
500+ components. This software calculates "Xtvity" which is an
estimate of the relative versatility of a solvent system to dissolve
dissimilar materials.
|
| Solvent Engineering provides third party
certification of acceptability for products requiring USDA approval. |
| Solvent Engineering prepares Material Safety Data
Sheets (MSDS) for chemical products in English, or in Spanish, with an MD
translator. This includes DOT
shipping classification, label requirements, and exemptions. |
| Solvent Engineering offers a number of
unique industrial products to manufactures/distributors on a royalty or
outright sale basis. Existing
products available for immediate sale or license include:
1. Liquid
laundry detergent that breaks down into plant nutrients.
This formulation is ideal for sale in arid areas where grey water can
be used to water golf courses and gardens.
2. Non-emulsifying
cleaners that quickly release oil and grease for easy on site clarification
of a facility's wastewater. This
formulation allows wastewater discharge to sewer, rather than disposal as a
hazardous waste.
3. Freezer
cleaner useful at -80'F with a flash point of 103'F. This formulation is
safer to use and store than isopropanol based cleaners.
4. Environmentally friendly paint
stripper. This formulation has
low VOC’s, non-toxic and non-methylene chloride based.
5. High
flash point solvent degreaser. This
formulation is both rinseable with a "quick split" separation of the
oils and greases, as well as being a "no residue” wipe on, wipe off
cleaner.
6. Cementacious
insulating coating for iron or aluminum effective up to about 1800°F
(1000°C). The user sprays,
brushes or dips the coating onto the surface and air-dries it at 100 -150°F
to cure. This non-ceramic
coating requires no fusion. Tests on automotive exhaust systems found over 30%
reduction in CO and hydrocarbon emissions due to higher catalytic converter
temperature. Chromed exhaust
piping with an internal coating was not discolored by heat.
|
For More Information Contact:
Richard N. Miller
Technical Director
Solvent Engineering
508 Lakewood Drive, Alva, OK 73717-9713
Tel: (580) 327-3577, (800) 342-3577 & FAX: (580) 327-3579
Internet: soleng@pldi.net
|
![[Matches Logo Image]](_borders/Icon1.gif)
